Procreate vs a stencil app: trace by hand or go automatic?

Hand tracing in a drawing app and generating a stencil automatically are not rivals. They solve different parts of the job. Here is what each does well, where each falls down, and the hybrid workflow most working artists settle on.

Updated 17 November 2026

Tracing by hand in Procreate (or any drawing app)

The classic method: put the reference on a bottom layer, lower its opacity to 20–40%, add a new layer on top, and trace with a monoline or technical pen brush. Hide the reference, export the line layer, and print.

Where it wins

Where it costs you

Automatic stencil makers

An automatic stencil maker finds edges in the reference and turns them into clean black lines. In StencilReady you choose a style (Outline, Sketch or Solid), adjust detail, sensitivity and line weight, and print at true size, usually within a minute.

Where it wins

Where it falls short

Which to use when

JobBetter choice
Portrait or realism outline from a good photoAutomatic, then touch up
Pet portraitAutomatic, then touch up
Client's pencil sketch or a drawing you made on paperAutomatic (Solid style cleans up a photo of a drawing)
Flash, existing line artAutomatic
Script and letteringBy hand
Mandala, geometric, ornamentalBy hand
Custom design combining several referencesBy hand, or automatic for each part then compose
Silhouette or blackwork shapeAutomatic (Solid style)

The hybrid workflow

For most pieces, the fastest route to a stencil you trust is: generate, then edit.

  1. Generate the base. Load the reference in StencilReady. Pick a style, keep detail on the low side, and set the real size and line weight. Turn on clean up stray marks.
  2. Export a PNG. Download it at the size you set. Pro exports at 300 dpi, which gives you more pixels to edit.
  3. Touch up in your drawing app. Import the PNG to a new canvas. Put the original reference underneath at low opacity. Erase lines that do not belong (clothing folds, background, hair strands) and redraw the few that matter most: eyes, lips, the main contour. Close any gaps in the outline.
  4. Keep the size. Do not resize or crop the canvas once the PNG is in, or note the new dimensions. Export at the same resolution.
  5. Print at 100%. Print with no scaling and check the size against a ruler. If you print from StencilReady's PDF, the sheet has a calibration ruler; if you print your edited PNG from another app, measure a known dimension of the design.

A ten-minute touch-up on a generated base usually beats an hour of tracing from scratch, and your judgement still decides every line that matters.

Settings that make touch-up easier

For portrait-specific choices see portrait stencils from a photo, and for weights see line weight and needle size.